Technology Center
Recommended Products
Contact Us
Contact Person: Cindy Zhu
TEL：+86 13418453374
What is the difference between gravity casting and die casting?
2022-11-21With the development of industrial production, the process performance requirements of casting production are getting higher and higher, and the production means have been gradually optimized with the requirements. For example, gravity casting, as a relatively...
How much can the thinnest aluminum alloy cavity CNC be processed?
2022-07-23According to personal experience for many years, CNC machining of aluminum alloy cavity, the thinnest side wall height of 10MM can be at least 0.2, 20MM high and the thinnest can be 0.3, 30MM high and the thinnest can be 0.4 The bottom thickness should be dete...
Precautions for slow wire processing
2022-02-22Precautions for slow wire processingshower1. Read the drawing requirements. What material, how high.2. Call out the program to simulate the graphics, compare it with the drawing to see if it is correct, so as not to copy the wrong program, and then zoom in on ...
The working principle of CNC precision parts processing
2022-02-12The working principle of CNC precision parts processing CNC precision parts processing control system. Generally, the machine tool can be controlled according to the numerical sequence command to realize the automatic start and stop o...
Principles and characteristics of super finishing
2022-01-05Principles and characteristics of super finishing Super finishing is actually a friction polishing process, which is an effective finishing method to reduce surface roughness. It has the advantages of simple equipment, conveni...
The greater the value of precision machined parts, the greater the deviation
2021-12-28The greater the value of precision machined parts, the greater the deviation Machining manufacturers have been emphasizing that the products produced must meet the degree of precision, which refers to the level where the main pa...
Processing methods and skills of large aluminum alloy parts
2021-12-22Processing methods and skills of large aluminum alloy parts What are the processing methods for large aluminum alloy precision parts? To make large aluminum alloy parts, the clamping method should be reasonable first. If you ca...
How to solve the problem of aluminum alloy hand plate deformation?
2021-12-21How to solve the problem of aluminum alloy hand plate deformation? After all, the prototype is only a sample of the product. In the course of use, the influence of excessive external force, temperature, environment and other fac...
Basic knowledge of machining?
2021-12-17Basic knowledge of machining? The datum used in part processing and assembly is called the process datum. According to different purposes, the process datum is divided into positioning datum, measurement datum and assembly datum. Let's study in detail...
What should be paid attention to when processing non-standard parts?
2021-12-16What should be paid attention to when processing non-standard parts? When machining non-standard parts in a mechanical processing plant, if the workpiece is too high, it should be roughed with cutting tools of different lengths in la...
